See my previous reaction.
Your decoder is a twin decoder (DCC/FMZ). Perhaps
this decoder is not very pleased with the DDW signals (DCC/MM).
You could try if it helps any, if you disable the MM
signals in the DDW-server.
If that doesn’t solve the problem, I have no
further ideas, except the one I already gave, the decoder does not respond to
DDW signals at all.
Fred
----- Original Message -----
Sent: Saturday,
September 15, 2007 12:41 AM
Subject: I: DDW-DDL-ML
Problem with SRCP
I tried to program the
decoder:
with prolok with the baud
rate setting to 16457 bps there is no problems, but with the ddw server and
railprog the decoder doesn’t respond. I found out that the decoder is
fleischmann 6839 twin.
Could someone give me a
solution/tip?
Thanks,
andrea
Da: Andrea
[mailto:raggi.andrea@alice.it]
Inviato: sabato 23 giugno 2007
10.28
A: 'ddw-mailing-list@kim.homelinux.com'
Oggetto: R: DDW-DDL-ML Problem
with SRCP
I tried with different
translations, but nothing it happens.
I wait further tips.
Andrea
Da: owner-ddw-mailing-list@kim.homelinux.com [mailto:owner-ddw-mailing-list@kim.homelinux.com] Per conto di Fred Stevens
Inviato: sabato 23 giugno 2007
0.26
A: ddw-mailing-list@kim.homelinux.com
Oggetto: Re: DDW-DDL-ML Problem
with SRCP
Hi Andrea,
DDW is only for 99% compatible with all kind of
decoders. The 1% that do not work, are caused by the fact that the PC’s
serial port is not able to correctly produce the digital signal as should be.
99% of the decoders on the market have enough tolerance to cope with this.
Although I don’t have any experience with the
Digitrax brand, I strongly believe the belong in the 1% group that don’t
work.
Have you tried al 3 possible NMRA translations in the
DDW server? Could be that one of them solves the problem.
Hope I could help out somehow.
Regards,
Fred Stevens, Netherlands.
----- Original Message -----
Sent: Friday, June 22,
2007 11:43 PM
Subject: DDW-DDL-ML Problem
with SRCP
Hallo,
I’m a Italian guy. I’m using the srcp
server and I’ve a problem with a digitrax(?) decoder. I explain you
better:
Two loco with Uhlenbrock decoder work without
problem;
The switch decoder work without problem;
I bought a new loco with digitrax decoder and it
doesn’t work.
I tried with locomaus and with lokboss and it works
in right way.
I don’t understand why this loco doesn’t
work with srcp server.
Have you experience with this brand?
Thanks in advance,
Andrea